General Engineer with Security Clearance
Dutieso Develops, plans and schedules, and establishes technical parameters for the conduct of conceptual and research studies in assigned areas of responsibility.
o Conducts extensive literature research, evaluation of scientific reports and other material to establish criteria and to obtain data in related fields which will aid in development of projects.
o Manages the development, maintenance, and utilization of BMD small computer network and associated models to allow top level systems analysis by the individual user.
o Plans and develops projects or problems to be accomplished which aid in the analysis of system effectiveness.
o Identifies and/or predicts the critical engineering and physical problem areas limiting the effectiveness of BMD systems, determines methods for solution of these areas and recommends courses of action.
o Drafts assigned portion of scopes of work, technical requirements, and other technical documents to be included in contracts to industry or tasks for support organizationsRequirements Conditions of Employmento Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
o Must be able to obtain and maintain a Secret clearanceQualifications Who May Apply:
Only applicants who meet one of the employment authority categories below are eligible to apply for this jobYou will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selectedSee Proof of Eligibility for an extensive list of document requirements for all employment authorities.
o Current Department of Army Civilian Employees Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel Workforce Interagency Career Transition Assistance Plan Land Management Workforce Flexibility Act Military Spouses, under Executive Order (E.
O.
) 13473 Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement Priority Placement Program, DoD Retained Grade Preference Eligible Veterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and experience requirements described belowExperience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.
g.
, Peace Corps, AmeriCorps) and other organizations (e.
g.
, professional; philanthropic; religious; spiritual; community; student; social)You will receive credit for all qualifying experience, including volunteer experienceYour resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your applicationAdditional information about transcripts is in this document Basic Education Requirement for Engineering (800 Series):
A- Bachelor's degree (or higher degree) in engineeringTo be acceptable, the program must:
(1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics(Note:
You must attach a copy of your transcripts.
) B- Combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineeringI am currently registered as an Engineer Intern (EI), Engineer in Training (EIT), or licensed as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto RicoAbsent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.
g.
, State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registrationFor example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions(Note:
You must attach a copy of your transcripts, AND proof of registration as an Engineer Intern (EI) or Engineer in Training (EIT) or copy of your Professional Engineer (PE) license.
) 1- Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) 2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico2-Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph AThe courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A3-Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.
g.
, engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidanceOrdinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.
g.
, in interdisciplinary positions(The above examples of related curricula are not all-inclusive.
) In addition to meeting the education requirement above, to qualify for this position you must also meet the qualification requirements listed below:
Specialized
Experience:
One year experience equivalent to the NH-02/GS-11 grade level or equivalent pay band in the Federal service that includes:
1) Formulating methods and techniques to perform investigations and/or analyses where there is an absence of precedents in literature; 2) Using simulations to validate software requirements and to ensure inter-disciplinary engineering integration at the system level; and 3) Identifying or predicting critical engineering and physical problem areas and determining methods to the solution of these problemsThis definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service NH-02 or GS-11 equivalentAll Current Federal Employees MUST attach a current SF-50 for considerationWithout a SF-50, your application WILL NOT be consideredYou will be evaluated on the basis of your level of competency in the following areas:
o Communications General Engineering Project Management ResearchEducation FOREIGN EDUCATION:
If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.
Seducation program; or full credit has been given for the courses at a U.
Saccredited college or universityFor further information, visit:
https:
//sites.
ed.
gov/international/recognition-of-foreign-qualifications/ Additional informationo This is a pay banded positionThe NH-03 band encompasses grades 12 and 13 under the General Schedule (GS) system.
o Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
o You will be required to provide proof of U.
SCitizenship.
o One year trial/probationary period may be required.
o Direct deposit of pay is required.
o Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
o If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
o This is a(n) Engineers and Scientists (Non-Construction) Career Field position.
o Multiple positions may be filled from this announcement.
o Salary includes applicable locality pay or Local Market Supplement.
o Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.
o Benefits Help A career with the U.
Sgovernment provides employees with a comprehensive benefits packageAs a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewardingOpens in a new window Learn more about federal benefits Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittentContact the hiring agency for more information on the specific benefits offeredHow You Will Be Evaluated You will be evaluated for this jo Recommended Skills Architecture Communication Electronics Engineering Physics Hydraulics Information Technology Apply to this job.
Think you're the perfect candidate? Apply on company site $('.
external-apply-email-saved').
on('click', function (event) window.
ExternalApply = window.
open('/interstitial?jobdid=j3w5bn68pwcdcpqyjnt', 'ExternalApply-j3w5bn68pwcdcpqyjnt'); ); Estimated Salary: $20 to $28 per hour based on qualifications.
o Conducts extensive literature research, evaluation of scientific reports and other material to establish criteria and to obtain data in related fields which will aid in development of projects.
o Manages the development, maintenance, and utilization of BMD small computer network and associated models to allow top level systems analysis by the individual user.
o Plans and develops projects or problems to be accomplished which aid in the analysis of system effectiveness.
o Identifies and/or predicts the critical engineering and physical problem areas limiting the effectiveness of BMD systems, determines methods for solution of these areas and recommends courses of action.
o Drafts assigned portion of scopes of work, technical requirements, and other technical documents to be included in contracts to industry or tasks for support organizationsRequirements Conditions of Employmento Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
o Must be able to obtain and maintain a Secret clearanceQualifications Who May Apply:
Only applicants who meet one of the employment authority categories below are eligible to apply for this jobYou will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selectedSee Proof of Eligibility for an extensive list of document requirements for all employment authorities.
o Current Department of Army Civilian Employees Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel Workforce Interagency Career Transition Assistance Plan Land Management Workforce Flexibility Act Military Spouses, under Executive Order (E.
O.
) 13473 Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement Priority Placement Program, DoD Retained Grade Preference Eligible Veterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and experience requirements described belowExperience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.
g.
, Peace Corps, AmeriCorps) and other organizations (e.
g.
, professional; philanthropic; religious; spiritual; community; student; social)You will receive credit for all qualifying experience, including volunteer experienceYour resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your applicationAdditional information about transcripts is in this document Basic Education Requirement for Engineering (800 Series):
A- Bachelor's degree (or higher degree) in engineeringTo be acceptable, the program must:
(1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics(Note:
You must attach a copy of your transcripts.
) B- Combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineeringI am currently registered as an Engineer Intern (EI), Engineer in Training (EIT), or licensed as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto RicoAbsent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.
g.
, State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registrationFor example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions(Note:
You must attach a copy of your transcripts, AND proof of registration as an Engineer Intern (EI) or Engineer in Training (EIT) or copy of your Professional Engineer (PE) license.
) 1- Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) 2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico2-Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph AThe courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A3-Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.
g.
, engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidanceOrdinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.
g.
, in interdisciplinary positions(The above examples of related curricula are not all-inclusive.
) In addition to meeting the education requirement above, to qualify for this position you must also meet the qualification requirements listed below:
Specialized
Experience:
One year experience equivalent to the NH-02/GS-11 grade level or equivalent pay band in the Federal service that includes:
1) Formulating methods and techniques to perform investigations and/or analyses where there is an absence of precedents in literature; 2) Using simulations to validate software requirements and to ensure inter-disciplinary engineering integration at the system level; and 3) Identifying or predicting critical engineering and physical problem areas and determining methods to the solution of these problemsThis definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service NH-02 or GS-11 equivalentAll Current Federal Employees MUST attach a current SF-50 for considerationWithout a SF-50, your application WILL NOT be consideredYou will be evaluated on the basis of your level of competency in the following areas:
o Communications General Engineering Project Management ResearchEducation FOREIGN EDUCATION:
If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.
Seducation program; or full credit has been given for the courses at a U.
Saccredited college or universityFor further information, visit:
https:
//sites.
ed.
gov/international/recognition-of-foreign-qualifications/ Additional informationo This is a pay banded positionThe NH-03 band encompasses grades 12 and 13 under the General Schedule (GS) system.
o Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
o You will be required to provide proof of U.
SCitizenship.
o One year trial/probationary period may be required.
o Direct deposit of pay is required.
o Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
o If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
o This is a(n) Engineers and Scientists (Non-Construction) Career Field position.
o Multiple positions may be filled from this announcement.
o Salary includes applicable locality pay or Local Market Supplement.
o Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.
o Benefits Help A career with the U.
Sgovernment provides employees with a comprehensive benefits packageAs a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewardingOpens in a new window Learn more about federal benefits Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittentContact the hiring agency for more information on the specific benefits offeredHow You Will Be Evaluated You will be evaluated for this jo Recommended Skills Architecture Communication Electronics Engineering Physics Hydraulics Information Technology Apply to this job.
Think you're the perfect candidate? Apply on company site $('.
external-apply-email-saved').
on('click', function (event) window.
ExternalApply = window.
open('/interstitial?jobdid=j3w5bn68pwcdcpqyjnt', 'ExternalApply-j3w5bn68pwcdcpqyjnt'); ); Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
